d. Circuit Breaker Installation in Driver's Compartment:
1. Remove two machine bolts (3) and bracket assembly (2) from sidewall. Retain machine bolts and bracket
assembly for later use.
2. Remove two machine screws (1), lock washers (5), nuts (6) and circuit breaker (4) from bracket assembly (2).
Discard machine screws and lock washers. Retain nuts and circuit breaker for later use.
Figure 2-10. Preparation
for CCS Circuit
3. Install circuit breaker (M13516/1-1) (1) on top surface of existing bracket assembly (3) with circuit breaker (7),
retained from step d.2. above, in its original position using two lock washers (MS35338-42) (4) and longer pan
head machine screws (MS35206-250) (5) with the nuts (6) retained from step d.2. above.
4. Reinstall bracket assembly (3) on sidewall with the two machine bolts (2) retained from step d.1. above.