MWO 5-2350-262-35-2
8. Release pressure from bottles (4 and 6) by untightening lids (3 and 7).
9. Transfer any solution from EMPTY bottle (6) back into FILLED bottle (4).
CAUTION
Do not use compressed air to purge MCU or coolant umbilical. High pressure will damage seals.
NOTE
1. Connect black tube (2) on release tether (1) to black connector (4) on lid (6) of EMPTY bottle (7).
2. Connect clear tube (11) on release tether (1) to white connector (10) on lid of FILLED bottle (8).
3. Connect pump (3) to white connector (5) on lid (6) of EMPTY bottle (7).
2
1
3
5
4
11
10
6
9
7
8
2-23