NO. 1 RIGHT ACTUATOR
NO. 1 ACTUATOR OIL FLOW AND HYDRAULIC PRESSURE TEST
Have suitable container ready to catch oil.
Stop engine; relieve hydraulic pressure. Disconnect NO 1 SPNSN UNIT-9 hose (1) at
elbow (2) on port 9 of No. 1 actuator (3). Cap elbow (2).
Connect tee (4), globe valve (5), and pressure measuring device (6) to end of NO 1
SPNSN UNIT-9 hose (1). Connect a drain hose (7) to open end of globe valve (5).
Place end of hose (7) in container. Start engine. Open globe valve (5). Observe for flow