FORWARD MANIFOLD PRESSURE TEST
Do not work under vehicle unless hull is blocked. Failure to comply
may result in severe injury or death to personnel.
Have suitable container ready to catch oil.
Stop engine; relieve hydraulic pressure. Remove all test equipment and connect lines.
Disconnect FWD MNF-9 tube (1) at forward manifold inlet port 9. Install pressure
measuring device (2) at end of FWD MANF-9 tube (1). Cap port 9.
Have assistant start engine and move SPRUNG/UNSPRUNG control valve lever to
SPRUNG mode. Read pressure measuring device.
Stop engine; relieve hydraulic pressure. Remove test equipment and connect hose.