STOWAGE AND DECAL, DATA PLATE, AND STENCIL GUIDE - CONTINUED
STOWAGE GUIDE - COMPONENTS OF END ITEM (COEI) - CONTINUED
Table 3. Stowage Guide - COEI: Two-Door End of ISU-60 Container - Continued.
Axle Assembly, Load Transfer
In right rear corner of 1.
Place one axle along back wall of
container, with wheel facing right and
other end resting in U-bracket on floor
Place second axle in front of first but
in reverse orientation. End of axle
rests in second U-bracket on floor of
Secure each axle with a pin assembly
through holes in U-brackets.
Secure each pin assembly with a
Wheel Assembly, Cutting Edge
In right front corner of 1.
Place two straps through loops on
Place one cutting edge wheel on its
side with wheel facing left.
Place other cutting edge wheel in front
of first, with wheel facing right.
Place H-shaped bracket on top and
pass two straps through bracket.