EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury
Remove three guard plates from underside of tractor and set aside for stowage in ISU-60 container:
To assist in installation of plates, mark plates as "front", "middle", and "rear".
With assistance, loosen but do NOT remove six bolts securing each guard plate to tractor frame.
Remove three bolts and washers from side of guard plate that is NOT slotted, while supporting remainder of
weight of plate.
Lower guard plate slightly and pull plate free of bolts and washers at opposite side of plate. Remove plate
from under tractor.
Repeat steps for two remaining guard plates.
Reinstall mounting hardware securely on frame of tractor.
FRONT GUARD PLATE
MIDDLE GUARD PLATE
REAR GUARD PLATE