EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
Stow four transmission mount bolts and washers in BII toolbox.
Stow 54 in. pry bar in on rear deck of scraper as follows:
Place pry bar in top holder, then place in bottom holder.
Secure pry bar with pin through bottom holder.
Secure loose ends of fuel, electrical, air, and hydraulic lines with general purpose straps.
Exhaust pipe must be taped closed to prevent wind from entering exhaust system and causing turbo-
charger to spin, without the benefit of lubrication. Failure to cover exhaust pipe may damage turbo-
Use duct tape (Item 22, WP 0026 00) to cover exhaust system.
Ensure all compartment doors and BII toolbox on rear deck of scraper are closed, latched, and secured with pad-
locks. Install instrument panel covers and secure with padlocks (WP 0005 00).
Rig sling legs to tractor and scraper (FM 10-450-5) in accordance with illustration and shipping data plates on trac-
tor and scraper. Tractor and scraper are now ready for hookup to CH-47 helicopter.