AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
Work simultaneously on both load transfer axles and operate hydraulics to extend or retract cylinders as
needed to align mounting holes.
Clean and lubricate pins with antiseize compound (Item 5, WP 0026 00) before they are installed.
Position each load transfer axle at front corner of bowl, pivot rod end of cylinder forward, align mounting holes,
and install to axle with mounting hardware (pin, retainer bar, two washers, and bolts) removed from axle in step a.
Tighten bolts securely.
Install each axle to front of bowl with mounting hardware removed in step b (pin, retainer bar, two washers, and
bolts). Tighten bolts securely.
AND RETAINER BAR