AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
Place transmission in N (Neutral) and lock. Apply parking brake.
Shut down engine.
Remove cotter pin and pin from each load transfer axle and turnbuckle.
Remove cotter pin and pin from other end and remove each turnbuckle from scraper bowl.
Operate hydraulics to lower load transfer axle wheels and cutting edge wheels to the ground.
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
Install two remaining short (6 5/8 in.) steering cylinder locking collars, one to each steering cylinder:
Disassemble each locking collar assembly: remove two bolts and washers, open locking collar, and remove hose
To prevent damage to cylinder rod, ensure rod surface is free of dirt or other debris before locking collars are
Position hose wrapping and short (6 5/8 in.) locking collar around rod end of each steering cylinder.
Install two washers and bolts to secure each locking collar. Tighten bolts evenly and securely.
SHORT LOCKING COLLAR