AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
Install elevator hangers:
Remove hangers from BII toolbox on rear deck of scraper.
GAA grease (Item 10, WP 0026 00) coated on elevator shafts will make hangers easier to install.
Position large end of each hanger on elevator shaft.
To assist in installing pins, work on both sides of scraper bowl at the same time.
Ejector can be moved slightly forward or rearward to allow installation of pins.
Install pin on each side of scraper bowl, by driving pin in.
Install washer and bolt on pin. Tighten bolt securely.