AIRDROP BY C-130 AIRCRAFT - CONTINUED
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
Use extreme caution when climbing on ladder. Failure to exercise caution may result in a fall, causing injury
Position ladder for access to elevator motor on left side of scraper bowl.
Disconnect three hydraulic hose quick disconnects at elevator motor and remove hoses. Install dust caps. Set hoses
aside until they are stowed, after elevator has been configured for air transport.
Remove speed reducer cover with O-ring from stowage in ISU-60 container toolbox.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury
Some oil will spill as hydraulic motor is removed. Oil is very slippery. Ensure all spills are cleaned up.
Failure to do so may cause injury to personnel.
Hydraulic motor weighs approximately 85 lb (39 kg).
Attach a suitable overhead lifting device to elevator motor. Take up slack in sling.
Remove two bolts, washers, and elevator motor from speed reducer.