AIRDROP BY C-130 AIRCRAFT - CONTINUED
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
Always wipe ends clean prior to disconnecting hydraulic lines. Ensure ends are clean prior to reconnecting.
Failure to do so may introduce contamination into hydraulic system.
On right side of scraper bowl, perform the following steps:
Remove straps from two hydraulic hoses, two fuel hoses, air hose, and electrical harness stowed inside bowl and
reposition harness and hoses at right side of draft frame.
All quick disconnect connections (hydraulic, fuel, and air) are made the same way. Be sure to turn quick dis-
connect collar a half turn after connecting to lock connection.
Remove dust caps and connect two hydraulic hoses at quick disconnect fittings. Turn quick disconnect collars a
half turn after connecting to lock connection.
Remove dust caps and connect two fuel hoses at quick disconnect fittings.
Remove dust cap and connect air hose at quick disconnect fitting.
Connect four 12-pin electrical connectors as shown.
Secure clip to draft frame with washer and bolt.
Secure electrical harness with clamp, washer, and bolt.