AIRDROP BY C-130 AIRCRAFT - CONTINUED
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
Hydraulic motor weighs approximately 85 lb (39 kg).
Attach a suitable overhead lifting device to elevator motor. Take up slack in sling. Remove two bolts, washers, and
elevator motor from mounting on stowage cup on rear deck of scraper.
Use extreme caution when climbing on ladder. Failure to exercise caution may result in a fall, causing injury
Place ladder against left side of scraper to access elevator motor mounting.
Remove two bolts and cover with O-ring from speed reducer. Reinstall two bolts removed from cover to stowage
cup on rear deck of scraper. Return cover with O-ring and mounting bolts to ISU-60 container toolbox.