FUEL LINES AND FITTINGS REPLACEMENT - CONTINUED
Use line wrenches to disconnect/connect fuel lines, to avoid damage to fittings.
Coat new O-rings with fuel prior to installation.
Install new O-rings and fittings (2 and 5) on machine.
Position hose (1) on machine.
Connect hose (1) to fitting (5) on bracket (4).
Install hose clamps, screws, and new tiedown straps to secure each hose to machine.
Connect other end of hose (1) to fitting (2) at auxiliary fuel tank connector (3).
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2). Check for fuel leaks.
Close engine access dor (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
END OF WORK PACKAGE