FAN AND FAN DRIVE REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove engine lifting bracket (22) from four bolts
(21) and fan drive (18).
Remove fan assembly from radiator assembly shroud.
Position fan assembly in radiator assembly shroud.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
Attach link bracket, nylon sling, and suitable lifting device to fan drive (18). Install engine lifting bracket (22) on
four bolts (21) and fan drive.
Install four bolts (21), engine lifting bracket (22), and
fan drive (18) on engine as a unit.