TM 5-3800-205-23-1
TRANSMISSION SHIFT CONTROL CAM AND LINKAGE REPLACEMENT - CONTINUED
0070 00
REMOVAL - CONTINUED
NOTE
Bolts and washers are located underneath linkage housing.
5.
Remove two bolts (14), washers (15), lever pivot pins
14,15,16
17
(16), and two levers (17 and 19) from linkage housing
(1) and two rods (18).
1
18
19
6.
Remove retaining ring (21) and cam follower (20)
17,19
20
from each of two levers (17 and 19). Discard retaining
rings.
21
0070 00-2