TM 5-3800-205-23-1
AIR COMPRESSOR GOVERNOR AND AIR COMPRESSOR MAINTENANCE - CONTINUED
0083 00
AIR COMPRESSOR REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
NOTE
Two hoses are still connected to air compressor. These hoses will be installed on new air compressor.
Air compressor weighs 65 lb (29.5 kg).
8.
Attach nylon sling to a suitable lifting device and to air compressor (21).
9.
Remove two bolts (30) and washers (31) from mounting bracket (32).
10.
Remove three bolts (36) and washers (37) from air compressor (21) timing gear housing (35), and end plate (38).
11.
Remove end plate (38) from timing bear housing (35).
12.
Carefully move air compressor (21) toward rear of engine until drive gear of air compressor is clear of engine. Remove
and discard gasket (39).
13.
Remove all elbows and adapters from air compressor (21). Clean all threads and coat threads with pipe sealing com-
pound and install in new compressor.
14.
Remove screw (33), washer (34) and mounting bracket (32) from air compressor (21).
21
39
38
390-1770
30,31
33,34
390-1771
21
32
36,37
35
0083 00-5