AIR HOSES AND TUBES REPLACEMENT - CONTINUED
AIR HOSES REPLACEMENT - CONTINUED
Install hose clamps, screws, and new tiedown straps to secure each hose to machine.
Connect other end of hose (1) to adapter (2) at elbow (3).
Place battery disconnect switch in ON position (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Start engine and fully charge air system (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
Check for air leaks.
Close engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
AIR TUBES REPLACEMENT
Perform following steps to replace each of nine tractor air tubes. Tubes are connected to hoses, adapters,
elbows, and air system components.
At right-rear of tractor, disconnect tube (5) from fitting