AIR HOSES AND TUBES REPLACEMENT - CONTINUED
AIR TUBES REPLACEMENT - CONTINUED
Disconnect hose (6) from other end of tube (5).
Remove screws and clamps to separate tube from machine.
Remove tube (5) from machine.
Position tube (5) to machine.
Remove old antiseizing tape and apply new antiseizing tape to male threads of all fittings before connections
Connect hose (6) to tube (5).
Install clamps and screws to secure tube to machine.
Connect other end of tube (5) to fitting (4).
Place battery disconnect switch in ON position (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Start engine and fully charge air system (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
Check for air leaks.
Close engine access door (TM 5-3800-205-10-1 or TM 5-380-205-10-2).
END OF WORK PACKAGE