ENGINE GRILLE, ACCESS DOOR, AND HOOD ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
Engine access door weighs 75 lb (34 kg).
Open engine access door (6). Fasten suitable lifting
device and link bracket to engine access door.
Remove cotter pin (7) and washer (8) from control rod
Remove four bolts (10) and washers (11) from hinges.
Remove engine access door (6) from hood assembly
Remove two nuts (12), bolts (13), and washers (14)
from hood assembly mounting under left front of cab.