SEAT REPAIR - CONTINUED
DISASSEMBLY - CONTINUED
Position seat adjuster (10) until two setscrews (14) can be seen through two holes at left side of seat adjuster. Loosen
each setscrew equally approximately two turns.
Remove two bolts (16) and stop block (17) from right-front corner of seat adjuster (10).
Note position of two guides with loosened setscrews for assembly.
Slide seat adjuster (10) forward and remove seat adjuster and four guides (15) from seat suspension assembly.
Remove plastic retainers carefully to avoid damaging boot.
One plastic retainer at rear of seat suspension is positioned with head at INSIDE of upper plate.
Remove one nut (20) and pry 32 plastic retainers (18) out from seat suspension assembly and remove boot (19). Discard