DATA PLATE AND DECAL REPLACEMENT - CONTINUED
DATA PLATE (BLIND RIVET) REPLACEMENT
DO NOT drill any deeper than necessary to remove rivet. Failure to follow this caution will result in damage
Using electric drill and twist drill the same diameter as body of rivet (3), drill through head and body of rivet and
remove each rivet from data plate (4). Discard rivets.
Remove data plate (4) from tractor.
Using blind hand riveter, install new data plate (4) on tractor with new rivets (3).
Use heat gun, as necessary, for ease in removing decal.
Lift and peel back decal (5) to remove decal from sur-
face of tractor.
Clean any remaining adhesive from decal (5) using
detergent. Rinse and dry area.
Peel paper backing from decal (5) and apply to surface
END OF WORK PACKAGE