ENGINE REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Nut (7) is used only on left-rear mount.
Remove two bolts (5), four washers (6), nut (7), and
two large washers (8) from from rear mount assem-
blies (9) on rear engine supports (10).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death
or injury to personnel.
Engine weighs 1,874 lb (850 kg).
Attach load leveler (hoisting beam) and a suitable
lifting device to engine lifting plates (11). Carefully
remove engine from machine.