FRONT AXLE ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove bolt (5) and clip from axle housing (4).
Repeat step on other side of machine.
Position hydraulic jack under axle housing (4) and
remove four nuts (6) from axle housing. Repeat step
on other side of machine.
Use extreme care when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
Axle housing weighs 650 lb (295 kg).