TM 5-3800-205-23-1
STEERING HYDRAULIC CYLINDERS REPLACEMENT - CONTINUED
0153 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Steering cylinder weighs 120 lb (54 kg).
Note quantity, thickness, and location of shims to ensure correct installation.
10.
Remove shaft (12) from steering cylinder (1) and lower cylinder to the ground. Remove shims (19).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Steering cylinder weighs 120 lb (54 kg).
Ensure same quantity and thickness of shims are installed as were removed, and in the same location.
1.
Attach nylon sling and a suitable lifting device to
12
15
16,17
steering cylinder (1) and raise into position.
2.
Install steering cylinder (1) on steering links (14 and
20) with shaft (12).
3.
Install grease fitting (15) on shaft (12).
4.
Install plate (18) on link (14) with three washers (17)
and bolts (16).
19
20
14
1
18
0153 00-4