TM 5-3800-205-23-1
STEERING HYDRAULIC CONTROL VALVE REPLACEMENT - CONTINUED
0154 00
REMOVAL
1.
Relieve hydraulic system pressure by moving steering
3,4
2
5
1
6
7,8
wheel in both directions (TM 5-3800-205-10-1 or TM
5-3800-205-10-2).
2.
Remove cotter pin (11), nut (12), bolt (2), and yoke
rod end (1) from steering control valve (10). Discard
cotter pin.
3.
Loosen retaining nut (5) and remove hose (3) and O-
ring (4) from steering control valve (10). Discard O-
ring.
4.
Remove four bolts (6), washers, flange (7) and O-ring
(8) from steering control valve (10). Discard O-ring.
5.
Remove tube (9) from steering control valve (10).
12
11
10
9
6.
Remove four bolts (15), washers, flange (16), and O-
10
13
14
ring (17) from steering control valve (10). Discard O-
ring.
7.
Remove tube (13) from steering control valve (10).
8.
Repeat steps 5 and 6 to remove tube (14) from steering
control valve (10).
16,17
15
0154 00-2