DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
HITCH REMOVAL - CONTINUED
At lower-front of hitch (25), remove three bolts (71), washers (72), and retainer plate (73) from each end of pin (74).
Using soft-faced hammer, remove pin (74) from hitch (25).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
Carefully lift hitch (25) from machine and place in safe work area. Remove chains and nylon sling.