TM 5-3800-205-23-1
STEERING LINK REPLACEMENT - CONTINUED
0156 00
REMOVAL - CONTINUED
2.
Remove three grease fittings (5) from top of steering links (1 and 7).
3.
Remove nine bolts (3), washers (4) and three plates (6) from steering links (1 and 7).
NOTE
Note quantity, thickness and location of shims to ensure correct installation.
4.
Attach nylon sling and suitable lifting device to steering cylinder (9) to support cylinder. Use a hammer and brass drift
to remove shaft (8) and shims (10) from steering links (1 and 7) and steering cylinder (9).
5
3,4
7
9
8
1
7
1
6
10
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
NOTE
Each steering link weighs 33 lb (15 kg).
5.
Attach nylon sling and suitable lifting device to sup-
port steering link (1).
11
1
NOTE
Note quantity, thickness and location of
shims to ensure correct installation.
6.
Use a hammer and brass drift to remove shaft (11),
shims (12), and steering link (1) from machine.
12
0156 00-2