ELEVATOR/WATER HYDRAULIC PUMP REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
With assistance, remove two bolts (17), elevator pump
(5), and O-ring (16) from torque converter. Discard O-
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
Elevator pump weighs 77 lb (35 kg).
Lubricate all new O-rings with clean oil before installation.
With assistance, install new O-ring (16) and elevator pump (5) on torque converter with two bolts (17).