ELEVATOR/WATER PUMP CONTROL VALVE REPLACEMENT - CONTINUED
If removed, install fittings to elevator control valve (3).
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
Elevator control valve weighs 77 lb (35 kg).
Attach nylon sling and suitable lifting device to eleva-
tor control valve (3).
Install elevator control valve (3) on machine with two
bolts (35), four washers (34), and two nuts (33).
Remove nylon sling and lifting device from elevator
control valve (3).
Lubricate all new O-rings with clean lubricating oil before installation.
Install new O-rings (30 and 32) and tube (31) on ele-
vator control valve (3).