FUEL PUMP, HOSES, AND TUBES REPLACEMENT - CONTINUED
FUEL PUMP REPLACEMENT - CONTINUED
Arrow marking on fuel pump must point toward front of machine.
Position fuel pump (5) on machine and install clamp (7) with washer (9) and screw (8).
Use two wrench method when connecting fuel hose and tube to fuel pump. Failure to follow this caution
may result in damage to ceramic adapter.
Connect tube (2) and hose (6) on fuel pump (5).
Open fuel shutoff valves (TM 5-3800-205-10-1).
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Prime fuel system and start engine (TM 5-3800-205-10-1). Check for fuel leaks.
Close rear compartment access door (TM 5-3800-205-10-1).