TM 5-3800-205-23-2
FUEL PUMP, HOSES AND TUBES REPLACEMENT - CONTINUED
0001 00
FUEL TUBES REPLACEMENT - CONTINUED
5.
Position tube (12) on machine.
6.
Lubricate new O-ring with clean fuel and install on hose (14).
7.
Connect hose (14) to tube (12).
8.
Lubricate new O-ring with clean fuel and install on tube (13).
9.
Connect tube (13) to other end of tube (12).
10.
Install three clamps (17) on tube (12) with washers (16) and screws (15).
14
12
390-1298
15,16
17
11.
Open fuel shutoff valves (TM 5-3800-205-10-1).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poinsoning.
12.
Prime fuel system and start engine (TM 5-3800-205-10-1). Check for fuel leaks.
13.
Close rear compartment access door (TM 5-3800-205-10-1).
END OF WORK PACKAGE
0001 00-6