FUEL/WATER SEPARATOR REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Ensure fuel/water separator head is clean before installing fuel/water separator filter housing to
Fuel filter has a locating notch that only allows proper installation.
Install fuel/water separator filter housing (8) on fuel/water separator head (3). Tighten retaining ring (10).
Open fuel shutoff valves (TM 5-3800-205-10-1).
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Prime fuel system and start engine (TM 5-3800-205-10-1). Check for fuel leaks.
Close rear compartment access door (TM 5-3800-205-10-1).
END OF WORK PACKAGE