ELEVATOR MOTOR REPLACEMENT - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
Elevator motor weighs 65 lb (30 kg).
Position nylon sling and suitable lifting device on elevator motor (4).
Install elevator motor (4) on elevator speed reducer (6) with two washers (3) and bolts (2).
Connect hydraulic hose quick-disconnects (1, 5, and 7) to elevator motor (4).
Check level of oil in speed reducer and add as needed. Refer to PMCS in TM 5-3800-205-23-1.
END OF WORK PACKAGE