EJECTOR CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Materials/Parts - Continued
O-ring (as required)
Tools and Special Tools
Shop equipment, field automotive (Item 23, WP
Toolbox and rear deck cover removed (WP 0017
Quick disconnects at right side of draft arms dis-
connected (TM 5-3800-205-10-1)
Do NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down
and hydraulic system pressure has been relieved. Tighten all connections before applying pres-
sure. Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.
At operating temperature hydraulic is hot. Allow hydraulic oil to cool before disconnecting
any hydraulics. Failure to do so could result in injury.
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
Cap all hoses and tubes to prevent fluid loss and contamination of oil system.
Tag all lines, hoses, wires, and tubes to aid in installation.
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suit-
able containers before opening any compartment or disassembling any component containing
Dispose of all fluids according to local regulations and mandates.