TM 5-3805-248-23-1
TRANSMISSION TROUBLESHOOTING PROCEDURES - CONTINUED
0013 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
3.
Transmission Shifts
Slowly.
Differential and transmission oil level, leaking lines or components, missing
detents and physical damage to linkages should all be corrected prior to per-
forming any diagnostics.
1.
Check control linkage for improper
Adjust or replace control linkage if not
adjusted properly, or if damaged or
defective.
2.
Check control group shift pressure
1. Adjust or replace control group if not
(WP 0365 00).
operating properly (WP 0364 00 and
WP 0365 00).
2. If problem still exists, replace
transmission (WP 0286 00).
NOTE
4.
Transmission Shifts
Roughly.
Differential and transmission oil level, leaking lines or components, missing
detents and physical damage to linkages should all be corrected prior to per-
forming any diagnostics.
1.
Check shift control linkage for
1. Adjust or replace shift control linkage
improper adjustment or damage (WP
as necessary.
2. If problem still exists, go to Test 2.
2.
Check primary setting of transmission
If primary setting of relief valve is not
relief valve (WP 0365 00).
correct, perform adjustment procedure or
replace (WP 0364 00 and WP 0365 00).
3.
Check load piston and valve springs
If problem still exists, replace transmission
by replacing pressure and selector
(WP 0286 00).
valve (WP 0364 00).
NOTE
5.
Transmission Does Not
Operate in Any Speed or
Differential and transmission oil level, leaking lines or components, missing
Will Not Engage.
detents and physical damage to linkages should all be corrected prior to per-
forming any diagnostics.
Check control linkage for improper
1. Adjust or replace control linkage as
2. If problem still exists, replace
transmission (WP 0286 00).