TM 5-3805-248-23-1
FUEL INJECTION LINES REPLACEMENT - CONTINUED
0030 00
REMOVAL - CONTINUED
NOTE
Tag lines prior to removal to ensure correct installation.
Use a container to capture draining fuel. Dispose of fuel IAW local policy and ordinances. Ensure all
spills are cleaned up.
Mark the exact location of mounting hardware and clamp prior to removal to aid in installation.
1.
Slowly loosen nuts on fuel injector lines (1, 2, 3, 4, 12 and 19) at injector pump (27).
2.
Disconnect fuel injector lines (1, 2, 3, 4, 12 and 19) from six adapters (16) and from injector pump (27).
3.
Remove nut (34), washer (33), strip (32) and damper (31) from fuel injector line (1) and supporting bracket (30).
4.
Remove bolt (28), washer (29) and supporting bracket (30).
5.
Remove two nuts (6), washers (7), strips (8) and dampers (9).
6.
Remove two bolts (11), washers (5) and strips (10).
7.
Remove nut (20), washer (21), strip (22) and damper (23).
8.
Remove bolt (26), washer (25) and strip (24).
9.
Remove six nuts (18) and adapter locks (17) from fuel injector tube assemblies (13).
6
13
7
14
8
15
9
1
16
5
10
2
17
3
4
11
18
34
33
12
32
31
19
30
20 21
29
22
28
23
24
25
26
394-009
27
394-009
0030 00-2