RADIATOR ASSEMBLY, SUPPORT ASSEMBLY AND MOUNTING MAINTENANCE - CONTINUED
RADIATOR ASSEMBLY, SUPPORT ASSEMBLY AND MOUNTING REMOVAL - CONTINUED
Radiator and support assembly must be placed on clean floor surface, fan side down. Wood blocks must
be placed in position to support radiator at top and bottom. Do not position radiator and support assem-
bly in an upright position. Failure to follow this procedure may cause injury.
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Lift radiator and support assembly straight up to prevent contact with fan blades. Failure to follow this pro-
cedure may result in damage to equipment.
Weight of radiator and support assembly is 1,000 lb (453 kg).
Remove radiator and support assembly (30) from machine and lower onto wood blocks.
Remove lifting device.