TM 5-3805-248-23-1
RADIATOR ASSEMBLY, SUPPORT ASSEMBLY AND MOUNTING MAINTENANCE - CONTINUED
0044 00
RADIATOR ASSEMBLY, SUPPORT ASSEMBLY AND MOUNTING INSTALLATION
WARNING
Radiator and support assembly must be placed on clean floor surface, fan side down. Wood blocks must
be placed in position to support radiator at top and bottom. Do not position radiator and support assem-
bly in an upright position. Failure to follow this procedure may cause injury.
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of radiator and support assembly is 1,000 lb (453 kg).
1.
Attach lifting device to radiator and support assembly
(30).
HOIST
2.
Raise radiator and support assembly (30) to upright
position.
AND
SLING
HEADLIGHT
BRACKETS
30
RADIATOR
WOOD BLOCKS
394-049
0044 00-12