TM 5-3805-248-23-1
WORKLIGHT SWITCH REPLACEMENT - CONTINUED
0064 00
REMOVAL
1.
Remove screw (9) and lockwasher (8). Discard lockwasher.
NOTE
Tag all wire connectors, cables and wiring harnesses prior to removal to ensure correct installation.
2.
Disconnect wire connector (7).
3.
Remove nut (3) and lockwasher (2). Discard lockwasher.
4.
Remove switch (6) from instrument panel (1).
5.
Remove key washer (4) and nut (5) from switch (6).
NOTE
If it is necessary to remove instruction plate, perform step 6.
6.
3
INSTRUCTION
2
PLATE
1
4
5
6
7
8
9
INSTALLATION
1.
If removed, install instruction plate and ground-driven steering pump indicator light (WP 0073 00).
2.
Install nut (5) and key washer (4) on switch (6).
3.
Install switch (6) in instrument panel (1).
4.
Install new lockwasher (2) and nut (3).
5.
Connect wire connector (7).
6.
Install new lockwasher (8) and screw (9).
7.
8.
9.
Verify operation of worklight (TM 5-3805-248-10).
END OF WORK PACKAGE
0064 00-2