TM 5-3805-248-23-1
FRONT WORKLIGHTS REPLACEMENT - CONTINUED
0083 00
NOTE
The following maintenance procedure is for the right front worklight. The maintenance procedure for the
left front worklight is identical.
FRONT WORKLIGHT LAMP REMOVAL
1.
Remove screw (5) and terminal lug (4).
2.
Remove lamp (13).
3.
Disconnect harness assembly (14) from lamp (13).
FRONT WORKLIGHT LAMP INSTALLATION
1.
Connect wire assembly (14) to lamp (13).
2.
Install lamp (13).
3.
Install terminal lug (4) and screw (5).
4.
Verify correct operation of worklights (TM 5-3805-248-10).
FRONT WORKLIGHT ASSEMBLY REMOVAL
1.
Remove screw (10) and washer (11) from back of worklight housing (1).
2.
Disconnect wire connector (12).
3.
If necessary, remove worklight. Refer to Front Worklight Lamp Removal in this work package. If necessary, remove
screw (6) and terminal lug (3).
4.
If necessary, remove lens retainer (2) from worklight housing (1).
5.
Remove nut (7) and washers (8 and 9).
6.
Remove worklight housing (1) assembly.
1
2
3
4
5
12
6
10,11
7,8,9 (HIDDEN)
394-084
0083 00-2