TM 5-3805-248-23-1
CONVERTER/RETARDER TEMPERATURE SENDING UNIT REPLACEMENT - CONTINUED
0093 00
REMOVAL
1.
Remove nut (4) and washer (3) under right side of machine.
2.
Disconnect wire connector (2).
NOTE
Use a container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills are
cleaned up.
3.
Remove temperature sending unit (1) from brake retarder oil line junction block.
1
JUNCTION
BLOCK
3,4
2
INSTALLATION
1.
Wrap threads of temperature sending unit with anti-seizing tape and install temperature sending unit (1).
2.
Connect wire connector (2).
3.
Install washer (3) and nut (4).
4.
5.
Verify correct transmission oil level (TM 5-3805-248-10).
6.
Operate engine and allow to reach normal operating temperature.
7.
Verify correct operation of converter/retarder temperature gage (TM 5-3805-248-10).
8.
Turn battery disconnect switch to ON position (TM 5-3805-248-10).
END OF WORK PACKAGE
0093 00-2