TM 5-3805-248-23-1
FLYWHEEL LUBRICATION SCREEN REPLACEMENT - CONTINUED
0133 00
REMOVAL
NOTE
Use a container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills are
cleaned up.
1.
Remove plug (6) to allow transmission fluid to drain (approximately 22 gallons ([83.3 l[).
2.
Remove four bolts (9) and washers (8).
1
2
9
8
3
4
7
6
394-303
5
CAUTION
Cap oil lines and plug openings after removing lines. Contamination of transmission system could result in
premature failure.
NOTE
Tag all hose assemblies prior to removal to ensure correct installation.
3.
Disconnect tube assembly (1).
11
4.
Remove two bolts (5), washers (4), gasket (3) and pre-
10
formed packing (2) from elbow (7). Discard gasket
and preformed packing.
5.
Remove preformed packing (16), screen assembly
(15) and preformed packing (14). Discard preformed
packings.
17
6.
Disconnect hose assembly (12) from elbow (13).
12
1
14
15
16
7.
Remove two capscrew (17), washers (10), preformed
packing (11) and tube assembly (1). Discard pre-
formed packing.
13
394-304
0133 00-2