TM 5-3805-248-23-1
TRACTOR BRAKE ACTUATOR LINES AND FITTINGS REPLACEMENT - CONTINUED
0162 00
REMOVAL - CONTINUED
1.
Disconnect hose assemblies (1 and 2) from brake actuator (WP 0151 00).
2.
Disconnect other end of hose assembly (2) from tractor quick release and holding valve (WP 0156 00).
3.
Disconnect other end of hose assembly (1) from tractor air brake relay valve (WP 0159 00).
NOTE
Note the routing and position of the hoses, any retaining hardware, and tie straps prior to removal to ensure
correct installation.
4.
Trace routing of two hose assemblies and remove all retaining hardware and tie straps.
5.
Remove four hose assemblies from machine.
1
2
394-287
INSTALLATION
NOTE
Apply anti-seizing tape half way up the threads of all hose and fitting connections prior to installation to
ensure correct sealing.
1.
Position four hoses on machine.
2.
Connect hose assemblies (1 and 2) to brake actuators (WP 0151 00).
3.
Connect other end of hose assembly (2) to tractor quick release and holding valve (WP 0156 00).
4.
Connect other end of hose assembly (1) to tractor air brake relay valve (WP 0159 00).
5.
Install all retaining hardware and new tie straps.
0162 00-2