TM 5-3805-248-23-1
STEERING HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0180 00
REMOVAL - CONTINUED
16.
Disconnect hose assembly (7) from tee (9).
17.
Trace routing of hose assembly (7) and remove all retaining hardware and tie straps.
18.
Remove hose assembly (7) from machine.
19.
If damaged, remove fittings from hydraulic steering pressure reducing valve which connect to hose assembly (7) (WP
20.
Remove 16 bolts (12), washers (13), two flange halves (25) and four flange halves (14) from steering control valve.
21.
Disconnect hose assemblies (15 and 21) and tube assemblies (23 and 26) from steering control valve.
22.
Remove and discard performed packings (16, 22, 24 and 27).
23.
Disconnect hose assembly (17) from elbow (18).
24.
If damaged, remove cap (8), tee (9), adapter (10) and preformed packing (11). Discard preformed packing.
25.
If damaged, remove elbow (18), valve (19) and seal (20) from steering control valve. Discard seal.
26.
Disconnect other end of hose assemblies (15 and 21) from hitch hoses (WP 0234 00).
27.
Trace routing of hose assemblies (15 and 21) and remove all retaining hardware and tie straps.
28.
Remove hose assemblies (15 and 21) from machine.
29.
If damaged, remove fittings from hitch hoses which connect to hose assemblies (15 and 21) (WP 0234 00).
8
9
14
12,13
10,11
7
27,26
12,13
STEERING
CONTROL
VALVE
14
12,13
25
12,13 24,23
22,21
18,17
15,16
20,19
394-462
30.
Disconnect hose assembly (29) from elbow (30).
31.
If damaged, remove elbow (30) and preformed packing (31). Discard preformed packing.
32.
Disconnect tube assembly (26) from hose assembly (28) and remove tube assembly (26) from machine.
33.
Disconnect tube assembly (23) from hose assembly (32) and remove tube assembly (23) from machine.
0180 00-4