TM 5-3805-248-23-1
STEERING HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0180 00
INSTALLATION - CONTINUED
23.
If removed, install fittings on hitch hoses which connect to hose assemblies (15 and 21) (WP 0234 00).
24.
Install hose assemblies (15, 17 and 21) and tube assemblies (23 and 26) on machine.
25.
26.
If removed, install new seal (20), valve (19) and elbow (18) on steering control valve.
27.
If removed, install new preformed packing (11), adapter (10), tee (9) and cap (8) on steering control valve.
28.
Connect hose assembly (17) to elbow (18).
29.
Install performed packings (16, 22, 24 and 27).
30.
Connect hose assemblies (15 and 21) and tube assemblies (23 and 26) to steering control valve.
31.
Install four flange halves (14), two flange halves (25), 16 washers (13) and bolts (12) on steering control valve.
32.
If removed, install fittings on hose multi-connector which connect to hose assembly (6) (WP 0233 00).
33.
If removed, install fittings on hydraulic steering pressure reducing valve which connect to hose assemblies (4, 6 and 7)
34.
Install hose assembly (7) on machine.
35.
Connect hose assembly (7) to tee (9).
36.
Install all retaining hardware and straps on hose assemblies (7, 15 and 21).
8
9
14
12,13
10,11
7
27,26
12,13
STEERING
CONTROL
VALVE
14
12,13
25
12,13 24,23
22,21
18,17
15,16
20,19
394-462
0180 00-10