STEERING CYLINDERS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Loosen bleeder valves on right and left steering cylinder assemblies (6) to open. Leave bleeder valves open until hydrau-
lic fluid, free of air bubbles, flows from bleeder valves.
Tighten bleeder valves on right and left steering cylinder assemblies (6) to close. Torque both bleeder valves to 24 lb-ft
Refill hydraulic tank to proper level (TM 5-3805-248-10).
Start engine (TM 5-3805-248-10).
Operate steering. Move system through at least five full movements of travel. This will bleed air out from system.
Shut down engine (TM 5-3805-248-10).
Check oil level in hydraulic tank and add if necessary (TM 5-3805-248-10).
Inspect all hose and tube assemblies for leaks.
END OF WORK PACKAGE