HITCH TO DRAFT FRAME INTERMEDIATE HOSES,
LINES AND FITTINGS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Use a container to capture draining hydraulic oil. Dispose of hydraulic oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
The following procedure is for the upper hydraulic hitch to draft frame intermediate hose. The proce-
dure for other hydraulic hitch to draft frame intermediate hoses are identical.
Remove four capscrews (2), washers (3) and two flange halves (4) from hose assembly (1) on draft frame.
Disconnect hose assembly (1).
Remove preformed packing (5) from hose assembly (1) and discard.