HITCH TO DRAFT FRAME INTERMEDIATE HOSES,
LINES AND FITTINGS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Only a qualified operator may perform the following procedure. All other personnel must clear the immedi-
ate area of the vehicle. Failure to follow this warning may cause injury.
Start engine (TM 5-3805-248-10).
If hose or tube assemblies were removed from a certain system, such as the ejector, operate only the ejector
control. If hose or tube assemblies were removed from all systems, operate all the controls to complete the
Operate hydraulic controls. Move each system through at least five full movements of travel to bleed air out of system
Shut down engine (TM 5-3805-248-10).
Check oil level in hydraulic tank and add oil if necessary (TM 5-3805-248-10).
Inspect all hose and tube assemblies for leaks (TM 5-3805-248-10).
END OF WORK PACKAGE
0235 00-5/(-6 blank)