HOSES (WITH CROSSOVER TUBE), LINES AND FITTINGS TO BOWL
CYLINDERS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Only a qualified operator may perform the following procedure. All other personnel must clear the immedi-
ate area of the vehicle. Failure to follow this procedure may cause injury.
Start engine (TM 5-3805-248-10).
Operate hydraulic bowl cylinder control. Move system through at least five full movements of travel. This will bleed the
air out of the system.
Shut down engine (TM 5-3805-248-10).
Check oil level in hydraulic tank and add if necessary (TM 5-3805-248-10).
Inspect hose and tube assemblies for leaks.
END OF WORK PACKAGE